Tag Archives: PiAware

Upgrading my PiAware Pt. 2

Its up!

Its up!

One done, one to go.

One done, one to go.

So after a week of rain, then realizing I had the wrong sized mounting brackets. My ADSB co-linear is back in the air. I’ve moved it about two meters along the side of the roof to the other side of the HF antenna to facilitate hooking up to the new lightning arrestor.

I’ve updated to Dump1090-Mutability over the normal Dump1090 supplied with the standard PiAware image as well.

In the theme of things in short supply, I’ve now run out of F-type compression connectors to plug my AIS antenna into the lightning arrestor 🙁

Upgrading my PiAware


PiAware Box 1.0

So the PiAware I operate has a problem: It isn’t uploading data! But in a weird way, it is. The receiver can still be accessed via port 30003 (Basestation format), this is the data stream that I scrape to operate the “Airplanes Nearby” widget to the right of this article. Normally this problem would require me to log into SSH and reboot it or go and unplug it. But this time its different, because while it is uploading data, SSH is inoperable and physically power cycling the device does not alter its behaviour. As you can see from the image, my housing isn’t very maintenance-friendly. So its time to upgrade.

Continue reading